
SKF
THAP400E - SKF Air Driven Oil Injector
SKU
: thap400e-skf
Availability
: In Stock ✅
Bulk Pricing :
Description
The SKF air-driven hydraulic pumps are available in four different pressure versions. they can be used for mounting OK couplings, large pressure joints such as bearings, flywheels, railway wheels and couplings. the full unit consists of a hydraulic pump or high pressuere oil injector, driven by an air motor.
Related Documents
Product Information

Availability:
In Stock ✅
Technical Data
Nominal Hydraulic Pressure
400 Mpa / 58000 psi
Operating Air Pressure
7 bar / 101.5 psi
Length
405mm / 16 Inch
Width 1
171mm / 6.7 Inch
Height 1
202mm / 8 Inch
Oil Outlet
G3/4
Volume Per Stroke
0.64 cm³ / 0.039 Inch³
DescriptionThe SKF air-driven hydraulic pumps are available in four different pressure versions. they can be used for mounting OK couplings, large pressure joints such as bearings, flywheels, railway wheels and couplings. the full unit consists of a hydraulic pump or high pressuere oil injector, driven by an air motor. Related DocumentsProduct Data Sheet
Instructions for Use
Product InformationBRANDS: ![]() thap400e-skf Availability:In Stock ✅ 13 kg Technical DataNominal Hydraulic Pressure400 Mpa / 58000 psi Operating Air Pressure7 bar / 101.5 psi Length405mm / 16 Inch Width 1171mm / 6.7 Inch Height 1202mm / 8 Inch Oil OutletG3/4 Volume Per Stroke0.64 cm³ / 0.039 Inch³ |
Product InformationBRANDS: ![]() thap400e-skf Availability:In Stock ✅ 13 kg Technical DataNominal Hydraulic Pressure400 Mpa / 58000 psi Operating Air Pressure7 bar / 101.5 psi Length405mm / 16 Inch Width 1171mm / 6.7 Inch Height 1202mm / 8 Inch Oil OutletG3/4 Volume Per Stroke0.64 cm³ / 0.039 Inch³ |
Bulk PricingFor bulk discount on this product, contact our dedicated sales team today by filling out the form below: |
Pressure gauge 0 - 400 MPa (58,000 psi) 1077589/3
Pressure gauge protection sleeve 100mm TMJG S100
High pressure pipe (2 m /6.5 ft) 227957 A/400MP
Carrying case 728245/3A
Set of hoses THAP E-2
Air valve assembly THAP E-3
Air inlet block THAP E-4Â
Air motor assembly THAP E-5
Oil inlet block THAP E-6
Oil injector assembly THAP 400E-7
Release valve assembly THAP E-8
Connection nipple assembly THAP E-9
Repair kit THAP 300E-10
Gauge plug assembly THAP E-11
Carrying handle THAP E-12
Protection device THAP E-PC1
Pressure gauge protection sleeve (for /SK1) TMJG S100
Mounting fluid (5 litre) LHMF 300/5
Dismounting fluid (5 litre) LHDF 900/5
|